Orfit Crystal - 2.0mm (1/12")
| Thickness |
mm (inches) |
2.0 (1/12") |
2.0 (1/12") |
| Perforation |
% (type) |
0 (non perfo) |
25 (maxi) |
Thermoforming conditions |
| Optimum activation temperature (in water bath) |
°C (°F) |
75 (167) |
75 (167) |
| Activation time (in water bath) |
min |
5 - 6 |
5 - 6 |
| Transparent when activated |
|
yes |
yes |
| Working time |
min |
1 - 1 1/2 |
0 1/2 - 1 |
| Hardening time |
min |
4 - 5 |
2 1/2 - 3 |
| Time to completion |
min |
14 - 15 |
11 - 12 |
| Resistance to stretch |
|
moderate |
moderate |
| Drape |
|
high |
high |
| Memory (after 200% elongation) |
|
high |
high |
| Maximum elongation when activated |
% |
n.a. |
1000 |
| Memory (after maximum elongation) |
|
high |
high |
| Sticks to itself when activated and wet |
|
temporarily |
temporarily |
| Sticks to itself when activated, after drying |
|
yes |
yes |
| Adhesion (velco strip) using heat gun |
|
no |
no |
Mechanical properties at 21°C (70°F) |
| Flexural modulus |
MPa |
18 |
8.5 |
| Elastic modulus |
MPa |
7.00 |
3.75 |
| Tensile strength |
MPa |
4.00 |
2.25 |
| Strain at break |
% |
no break |
no break |
| Shore D hardness |
|
73 (shore A) |
73 (shore A) |
General properties |
| Density |
g cm³ |
0.87 |
0.87 |
| Surface feeling |
|
sticky |
sticky |
| Color |
|
transparent |
transparent |
| Odor |
|
none |
none |
| Fatigue |
cycles |
n.a. |
n.a. |
| Biocompatible |
|
yes |
yes |
« Back
