Tecnofit - 3.2mm (1/8")
| Thickness |
mm (inches) |
3.2 (1/8") |
3.2 (1/8") |
| Perforation |
% (type) |
0 (non perfo) |
3.5 (mini) |
Thermoforming conditions |
| Optimum activation temperature (in water bath) |
°C (°F) |
65 (149) |
65 (149) |
| Activation time (in water bath) |
min |
3 - 4 |
3 - 4 |
| Transparent when activated |
|
yes |
yes |
| Working time |
min |
2 3/4 - 3 1/4 |
2 1/2 - 3 |
| Hardening time |
min |
7 3/4 - 8 1/4 |
6 1/2 - 7 |
| Time to completion |
min |
21 - 22 |
18 - 19 |
| Resistance to stretch |
|
high |
high |
| Drape |
|
high |
high |
| Memory (after 200% elongation) |
|
full |
full |
| Maximum elongation when activated |
% |
400 |
300 |
| Memory (after maximum elongation) |
|
full |
full |
| Sticks to itself when activated and wet |
|
yes |
yes |
| Sticks to itself when activated, after drying |
|
reliable under high stress |
reliable under high stress |
| Adhesion (velco strip) using heat gun |
|
yes |
yes |
Mechanical properties at 21°C (70°F) |
| Flexural modulus |
MPa |
445 |
345 |
| Elastic modulus |
MPa |
235 |
205 |
| Tensile strength |
MPa |
18.5 |
14.5 |
| Strain at break |
% |
no break |
no break |
| Shore D hardness |
|
57 |
57 |
General properties |
| Density |
g cm³ |
1.14 |
1.14 |
| Surface feeling |
|
smooth |
smooth |
| Color |
|
natural |
natural |
| Odor |
|
none |
none |
| Fatigue |
cycles |
>10000 |
>10000 |
| Biocompatible |
|
yes |
yes |
« Back
