While music brings us many joys, it can also bring us some discomfort. Musicians may experience different types of repetitive strain or overuse injuries due to hectic and long practice sessions, such as carpal tunnel syndrome, or tendinitis, or be bothered by arthritis in the finger joints. Some musicians may even have to stop playing their beloved instruments due to these issues.
Fortunately, there are a number of ways in which therapists can help musicians. Along with recommending stretches and taking frequent breaks in between playing, therapists can provide custom orthoses which may be very beneficial to both professional and amateur music makers. These custom-made orthoses can both support the musicians during play and/or help them to recover afterwards.
Below, is an interesting story of a musician patient who benefited considerably from a treatment with custom-made orthoses.
Afterwards, we offer some guidelines and tips for fabricating effective orthoses for musicians.
Helping a saxophonist in pain
Josh MacDonald MS OTR/L CHT, from Hand Therapy Partners in Phoenix, AZ shared the following story of one of his patients:
The patient is a twenty-year-old saxophonist, who has been playing his saxophone for more than 8 years and is now headed to college to get a degree in music. He also teaches saxophone and clarinet to high school music students.
Unfortunately, the saxophonist had been experiencing significant lateral epicondylitis and radial tunnel pain bilaterally after prolonged periods of playing. He admitted that he holds his hands and forearms under excessive tension when playing.
Therapist MacDonald offered to start with some simple measures at first. He told the young man to take frequent breaks, do warm ups and cool downs after extensive playing, and to consider the possibility of using supportive bracing when not playing. While these measures did have a moderate impact, the patient still experienced significant pain after long sessions of play.
The therapist decided to try a different approach and fabricated two custom orthoses moulded into the patient’s primary playing position for his alto saxophone. The young man held his instrument as he would during active play, and the therapist moulded the orthoses in this posture. This led to an atypical wrist and forearm position for typical orthotic fabrication, but the orthoses support this particular patient during play, without limiting his finger reach and mobility. These custom-made orthoses now allow the patient to play with less tension in his forearms and wrists.
The patient was able to try out the orthoses for 2 weeks prior to leaving for college. He reports that the splints relieve his pain and that they support him during long periods of practice.
He will not be able to wear them during performances, but they do now enable him to practice for longer periods of time without pain.
Tips and Guidelines
Key Points for treating musicians:
- Keep in mind that every musician is unique and that he/she must be evaluated carefully to determine what kind of orthosis might be of benefit. Have the musician bring their instrument to the clinic for the evaluation.
- Give each musician individualised warm up and cool down exercises.
- Advise the musician to take frequent breaks from playing their instrument.
- Orthoses can be moulded for both rest and for alleviating symptoms during play.
Treating a musician with an orthotic intervention may be similar to the approach used for athletes.
They might benefit from a less restrictive orthosis for playing and another more restrictive orthosis for periods of rest.
- Making adaptations to the instrument can be very helpful as well.
Guidelines regarding the fabrication of orthoses for musicians:
- The orthosis should limit motion as little as possible and should not interfere with the body motions of playing.
- Try to keep the orthosis as light as possible. You can use Orfilight or Orficast thermoplastic materials.
- Make sure the orthosis has minimal or no strapping.
- The orthosis should conform closely. Use a product with high drapability.
- Avoid unnecessary parts or protrusions.
- When the playing orthosis is worn it should not touch the instrument or interfere with its moving parts.
- Take care that the orthosis does not make any bothering noises.
Johnson, C. D. (1992). Splinting the injured musician. Journal of Hand Therapy, 5(2), 107-110.
Written by Debby Schwartz, OTD, OTR/L, CHT
Physical Rehabilitation Product and Educational Specialist at Orfit Industries America.
Debby is a hand therapist with over 34 years of clinical experience. She completed her Doctorate of Occupational Therapy at Rocky Mountain University of Health Professions in 2010.
She is also an adjunct professor at the Occupational Therapy Department of Touro College in NYC and has written many articles for hand therapy journals, including the ASHT Times and the Journal of Hand Therapy.